Office branding

Quiet rooms and offices
Entrance doors
Meeting rooms
Reception sign

The quiet rooms and the personal offices are designed using a pattern with Scatec Solar’s hexagon. Some terms here and in the files available for download below are fairly technical, however, your suppliers should understand. The foils used in these rooms are produced in the following way:

Foil type: X 3M SC IJ 40-124. Foil in height 1220mm, cleaned down to 1200mm after print.

Length for 1 piece of printed design is 11840mm.

UV Print, UV White 70%.

If there are any questions, please contact Communication and HR Coordinator, Rebecca Arntsen, rebecca.arntsen@scatecsolar.com.

The entrance doors are also designed using the hexagon graphic, but following a different pattern. The reception door is slightly different than the doors on the 10 and 12 floors as it has a more clear background on the pattern. Please contact Rebecca Arntsen if there are any questions regarding printing specifications.

Reception doors

The foil used for the reception door is produced as follows:

Foil type: X 3M SC IJ 40-114. The foil is 1220mm in height, cleaned down to 1200mm after print.

The length for 1 piece of motif is 2780mm.

UV Print, UV White 70% + CMYK for orange PMS 137 C. The orange pattern became clearer than anticipated, this way, for better results other offices should print with an orange + white layer 70% between + orange. In other words, have one orange layer, with a white over and another orange on top (this way, being possible to see the orange from inside and outside).

Other floors

The foils used at the entrance doors of floors 10 and 12 are produced as follows:

Foil type: X 3M SC IJ 40-124. The foil is 1220mm in height, cleaned down to 1200mm after print.

The length for 1 piece of motif is 2780mm.

UV Print, UV White 70% + CMYK for orange PMS 137 C. Similarly to the reception door, the orange pattern should be print with an orange + white layer 70% between + orange for best results.

The meeting rooms have a photo covering the glass walls. There are different images in each meeting room and here you can see examples of three meeting rooms, one on each floor. The file available for download is based on the meeting room example 1 which is located on the 12 floor. The foil used for this meeting room was produced in the following way:

Foil type: X 3M SC IJ 40-124. The height foil is equal to the window’s net height + 2 x 30mm dropout.

Length for 1 piece of printed motif is the net width of the window + 2 x 30mm output.

UV 3 layers.

Scatec Solar’s logo calls attention as soon as people come in on the reception floor. The sign with the logo is placed on the wall right after the entrance door in the 11 floor. The dimensions used can be found in the reception logo file below. If any modifications need to be made for any other offices, please contact VP Communication and IR Ingrid Aarsnes for approval, ingrid.aarsnes@scatecsolar.com.